I have a limited number of laser-cut acrylic finger guards as fitted on some RA17s and RA17Ls.
Whereas the originals were approximately 1mm thick and retained by proprietary clips, these prototype replacements are 2mm thick and secured to the front panel using strong double-sided tape (supplied).
Please note, these are NOT suitable for fitting to RA117s due to the position of the VFO selector switch.
Finger Guards for the RA17 & RA17L
(NOT suitable for the RA117)
If you are interested in purchasing these, please contact me via email.
Price: £10.00 per pair, Postage and packaging not included. Can post worldwide.
Supplied with a pre-fitted ‘ring’ of double-sided tape.